Do not use this unit in or near water. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. Slots and openings on the cabinet top, back, and bottom are provided for ventilation.
To ensure safe and reliable operation of this unit, and to protect it from overheating, do not block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on the bottom of the cabinet will be blocked.
This unit should never be placed near or over a heat register or radiator. This product should only be operated from the type of power source indicated on the marking label of the AC adapter.
If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15 amperes. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock.
Never spill liquid of any kind onto or into this unit. Page 4 Except as specifically explained elsewhere in this manual, do not attempt to service this product yourself.
Refer all service issues to qualified service personnel. Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions: a. When the product does not operate normally under normal operating conditions. Stereo Audio input RCA connectors 7. The system needs a few seconds to recognize a new video source setting. Reserved, should always be OFF. If you have purchased a computer specified for video editing it will almost certainly be set up correctly.
If you are in any doubt please consult your computer reseller, or a computer technician. Shut down all resident programs in your PC for better editing performance. If there are device control settings on your editing platform please set them to off. This enables users to monitor a live digital video feed from a DV camcorder or DV deck during capture, without any conflict. It means a huge saving of time for all video editors working with DV tape.
Make sure your DIP switch settings are correct for your set up see page 11 Connect the analogue Audio and video outputs on the rear of the DAC to the inputs on your record deck. Please ensure that you set the input of your record deck to the appropriate setting. Page Specification Composite Video Source 1. Our support team is available to assist you in setting up and operating your system. Please refer to our web site www. Print page 1 Print document 16 pages.
Rename the bookmark. Delete bookmark? Cancel Delete. If you have a DAC that has a built-in amplifier, so you can connect the headphones directly to it and increase the volume. But note that some DACs are more capable than others of controlling high impedance headphones. For example, Sennheiser HD headphones are rated at ohms, and if the DAC is not designed for this, the sound can be very quiet. In comparison, your everyday gaming headset has a much simpler ohm control. Jitter actually means time distortions of playback of a digital audio signal.
DAC has only one important task — to transform digital values to analog voltage level sequences. Basically, it has to provide users with aligning the time distance between two different audio files. However, synchronization is not always ideal and the restored signal still remains distorted but seems more smooth and harmonious in comparison with the default one.
I shall admit that there is no certain answer to this question. Opinions vary from person to person. If you want to improve audio quality without any specific features — buying a sound card is not a big deal. Another thing is considering having a DAC.
It is more helpful when you want to produce maximum quality audio, record on your own, etc. The price is also a point. Sound cards are a lot cheaper than DACs, so primarily, you have to realize what budget you can actually rely on.
Basically yes, it certainly will. Technically, everything is not that simple. DAC can make a perceptible difference but in fact, everything depends on other components you use, and mostly, the room you are going to listen to and stream music. Mostly, they show their influence right after the sound has been converted from digital to analog. Balanced connections cause the effect when basic noise gets out of phase with itself, so it actually eliminates.
Most popular cables still remain XLR and TRS that are used to transmit balanced audio from one balanced device to another. Unbalanced cables are much more simple and not that complicated but on the contrary, they cause more troubles with noise. Unbalanced lines should be short, under 25 feet approximately. This is to minimize any possible noise that may appear. RCA phono is the most known type of audio output.
It sends stereo audio over a right channel that is marked as red, and a left channel marked as black or white. Mini-jack if you feel unfamiliar with this name, actually, you may have heard something like a phone jack, audio jack, headphone jack, or jack plug, right?
Well, it is a family of electrical connectors typically used for analog audio signals. It can either be mono or a stereo version. The mono version will have one ring on the barrel of the jack itself — and the stereo version will have two. The mini-jack is usually used for transmitting analog mono or stereo audio signals. XLR connectors are generally 3-pin connectors: positive, negative, and ground. They transmit microphone or balanced line-level signals. The XLR connectors are circular in design and always have three and seven pins.
In audio, you will typically see XLR cables connecting microphones to mixers and connecting various outputs to powered speakers. Although the optical digital Toslink connector may look like a single RCA plug, it carries stereo digital audio.
This cable is specially created for digital audio transfer and is often used between televisions, soundbars, and amplifiers. Toslink cables are widely used to connect a TV to a surround receiver or soundbar.
Generally, its the ability to transmit digital audio signals without any distortions, losses of quality, or noise impact that depends on your environment. Sell now - Have one to sell? Shop with confidence. Get the item you ordered or get your money back. Learn more - eBay Money Back Guarantee - opens in a new window or tab. Seller information. Contact seller Contact seller. See other items See other items. Item Information Condition:.
Sign in to check out Check out as guest. The item you've selected was not added to your cart. Add to Watchlist Unwatch. Watch list is full. Shipping help - opens a layer International Shipping - items may be subject to customs processing depending on the item's customs value. Your country's customs office can offer more details, or visit eBay's page on international trade.
Located in:. Indianapolis, Indiana, United States. This amount is subject to change until you make payment. For additional information, see the Global Shipping Program terms and conditions - opens in a new window or tab This amount includes applicable customs duties, taxes, brokerage and other fees.
For additional information, see the Global Shipping Program terms and conditions - opens in a new window or tab. Estimated between Tue.
0コメント